mangOH Red Manual
Also see for Red: User guideUser guideGetting startedGetting started guide
                                                            | |
Contents
| 
Rev 3 9/21/17 611: IntroductionNow that you have your mangOH™ Red, it’s time to start using it!Use this guide to:• Assemble your mangOH Red• Set up your dev machine for mangOH development• Install and run applications, and send data to the IoT Cloud via AirVantage, Sierra Wireless’ cloud-basedservice platform for over-the-air (OTA) device management.To get started with a Windows dev machine, or for other mangOH Red resources (guides, tutorials, etc.), visitmangoh.io/mangoh-red-resources.1.1 Get Started!Before you begin, make sure your dev machine meets the minimum suggested requirements in Table 1-1 onpage 7 for mangOH Red application development.Important: Use this guide only if you are using a native Linux computer (dev(elopment) machine)—Ubuntu isrecommended. This guide includes instructions for native Linux® dev machines using CLI (Command Line Inter-preter).Important: Follow all steps as described. If you skip, change, or ’jump around’ steps, your device or devel-opment environment may not work properly.Note: The instructions in this guide have been tested on Ubuntu 16.04. If you use a different distribution(e.g. Debian, Fedora, etc.), you may need to adjust commands, set permissions, etc. If you need assistance,please check out the forum at forum.mangoh.io.Step 1Step 2Step 3Step n-1...Step nStep 1Step 2Step 3Step n-1...Step n |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine