Nilan reserves the right to alter these instructions without prior notice Page 20 af 26Preset” ” indicates that the menu point flashes and can be set to another value.RESTORE menu allows you to reload a copy of the installation setup.By keeping the ESC + key pressed for 5 seconds a new menu item RESTORE appear, this isthen acceptable / activated by pressing the ENTERUse of the CTS600 panel:- press ESC to go one step back in the menu- press qpto move up or down in a menu or to adjust anactivated menu- press ENTER to activate a menu- press ENTER to confirm a menu- press OFF to turn off the unit- press ON to turn the unit onHEATINGSURFACEAIREXCHANGEDEFROSTINLETCONTROLSERVICE ENTERTEMP.CONTROLMANUALOFFROOMCONTROLPRESETOFFENTER PRESET”OFF”PRESET”STANDARD” Factory settings arechosen when pressingENTER at”STANDARD”. If aheating element isinstalled, it must beactivated in the servicemenu again.AIREXCHANGE”BACKUP””RESTORE”PRESETPRESET The backup will besaved.The backup is restored.Subsequently, thesystem must berestarted.PWR SAVEMODBUSADR 30OFFDATALOGINTV 10RESTARTOFFFigure 15: The "Preset" menu