norbar NORTRONIC 43501 Operator's Manual

Also see for NorTronic 43500: Operator's manual Operator's manual

norbar NORTRONIC 43501 Operator's Manual Manual pdf 23 page image

21Auto Reset (Hold Time ?)Auto Reset ?Not EnabledPress or to change setting.If Enabled, pressing or will take the user to ‘SETUPHold Time ?’.If Not enabled the user will return to SETUP. Enabled = Hold the torque (and angle) values the length of the Hold Time setting after the torque hasbeen removed and then reset the display to 0. Not Enabled = Hold the torque (and angle) values until the ZERO button has been pressed and thenreset the display to 0.Hold Time ?Hold Time ?4 SecPress or to change value.Press or to confirm and go to SETUP (saving changes). Minimum = 1, Maximum = 10. Default = 4DisplayInverse ?Not EnabledPress or to change value.Press or to confirm and go to SETUP (saving changes). Enabled = Black digits on White background, Not Enabled = White digits on Black background, whenin the Measure display.WARNING: WHITE DIGITS ON BLACK BACKGROUND WILL REDUCE THEOPERATIONAL BATTERY LIFE BY APPROXIMATELY 65%.Torque CRSDistance ?31.8 mmPress or to change value.Press or to confirm and go to SETUP (saving changes). Minimum = 0.0, Maximum = 999.0. Default: - NorTronic® 50 & 200 = 31.8 mm, NorTronic® 330 = 35.0 mm.