Connecting to devices with Bluetooth ® wireless technology :: 613. Open the menus .4. Select Send on the leftmost menu.5. Select Bluetooth, and then select OK.6. Select the receiving device on the Discovery Results View, and then select OK.Sending an application over a Bluetooth wireless connection1. Go to Applications .2. Open the menus .3. Select Send on the App menu.4. Select the Send From pick list and select whether the application you want to sendis located on your Treo smartphone or on an expansion card.5. Select the application you want to transfer. It cannot have a lock next to it.6. Select Send.7. Select Bluetooth, and then select OK.8. Select the receiving device on the Discovery Results screen, and then select OK.Receiving information over a Bluetooth wireless connection1. Go to Applications and select Bluetooth .2. Select Bluetooth On.3. If you already have a trusted pair with the other device, your Treo smartphone isready to receive the info. If you don’t have a trusted pair with the other device,select the Discoverable pick list and select Yes.4. Exit the Bluetooth application by pressing Applications .You can set yoursmartphone to receiveBluetooth wirelessconnections when yourphone is off. However, keepin mind that the Bluetoothradio consumes batterypower even though yourphone is off.Go to Applications, selectBluetooth and selectBluetooth On. Open theOptions menu and selectDo not allow wakeup. Thistoggles the setting to Allowwakeup.Check your battery levelbefore establishing aBluetooth wirelessconnection. If the batterylevel is low, you can’t makea Bluetooth wirelessconnection.SnuffyUG.book Page 61 Friday, February 18, 2005 1:23 PM
