User Manual1. GPON properties 10www.qtech.ru1.4.1. Serial PortPlease set the baud rate as 115200.Please do not choose “RTS/CTS” and “XON/XOFF”, see the figure below:Figure 1-1 Serial Port1.4.2. Telnet1.4.2.1. Out band ConfigurationQSW-9010 has two out-band management ports, the first (the upside one) IP address is192.168.100.2, which can not be changed, while the second (the downside one) IP is 192.168.1.32.In addition, OLT can be managed by Telenet after in-band IP configuration. In-band management system connects to the IP network by using the service channel(Uplink port), which is usually used for real network deployment. Out-band management system use MGMT port, the management channel will beindependent from the service channels, which is usually used for local management andmaintenance.1.4.2.2. In-band management configurationThe information will be sent by service channel under in-band management mode. It is more flexibleand cost-effective, but not convenient for maintenance.Table 1-1 Configuration Data
