User Manual10. Uplink port LAG service Configuration 91www.qtech.ru10.2. Static trunk configuration steps:The default configuration is trunk 1:OLT (config) #interface trunk 1In the uplink interface configuration mode, add the port to trunk.OLT (config) #interface xe1 / 1OLT (config-xe1 / 1) # trunk 1OLT (config) #interface xe1 / 2OLT (config-xe1 / 2) # trunk 1Configure trunk VLAN and rate.OLT (config) # interface xe1 / 1OLT (config-xe1 / 1) # no shutdownOLT (config-xe1 / 1) # speed 1000OLT (config-xe1 / 1) #switchport mode trunkOLT (config-xe1 / 1) # switchport trunk tag 200OLT (config) # interface xe1 / 2OLT (config-xe1 / 2) # no shutdownOLT (config-xe1 / 2) # speed 1000OLT (config-xe1 / 2) #switchport mode trunkOLT (config-xe1 / 2) # switchport trunk tag 200 View trunk stateOLT (config) # show trunkOLT (config) # show trunk verbose
