Össur i-limb hand Series Clinician Manual

Also see for i-limb access hand: Instructions for use

Össur i-limb hand Series Clinician Manual Manual pdf 21 page image

21 of 27For small, medium and large hands:To replace the thumb on all other sized hands use a T10screwdriver and follow these steps1. Rotate the thumb to the lateral position2. Remove palmar fairing3. Access thumb screw from medial to lateral direction4. Remove thumbReplace the thumb following the steps in reverse. Whenreplacing the palmar fairing care should be taken to avoidpinching wires.6.3 CleaningThe i-limb hand can be cleaned with a soft damp cloth,with some mild soap.The cover should be regularly cleaned on the outsidewith a damp cloth and a plain soap. Cleaning with isopro-pyl alcohol (IPA) once a week can help with disinfection.The cover or i-limb® hand should not be submerged inwater for cleaning.The electrode surface and the magnetic charge port sur-face can be cleaned with mild soap and a damp cloth. Donot use any strong chemicals within the socket. Regularly clean the electrode contact sur-face with mild soap and a damp cloth.Avoid dirt or fluids coming in contactwith the electrode.Avoid use of oils on the skin; such asVaseline or oil based moisturisers.