Össur i-limb hand Series Clinician Manual

Also see for i-limb access hand: Instructions for use

Össur i-limb hand Series Clinician Manual Manual pdf 7 page image

7 of 272.0 Prosthesis fabricationThe i-limb hand is assembled in combination with asocket made to the requirements of the individual user.When fabricating the prosthesis for the i-limb® handconsideration should be given to:a. Electrode positioningb. Battery placement, size and configurationc. Charge port placementd. Socket length and overall length of the prosthesisPrecautions should be taken against sweat entering thecomponents, as sweat ingress can cause damage andcompromise the function of the prosthesis.The use of carbon fiber is not recom-mended due to electrical conductivity.2.1 Socket materialsThe socket design and materials used for the prosthesisare based on the clients presentation and skin condition.Typical inner socket materials include silicone, thermo-plastic and laminate. The outer socket is primarily lami-nate.For a standard prosthesis, a minimum expected layupwould be;Inner socket: 2 layers of perlon stockinette, 2 layers ofnyglass and 2 layers of perlon stockinette.Outer socket: 4 layers of nyglass and 2 layers of perlonstockinette.The build of each prosthesis should be adjusted specifi-cally to meet the individuals requirements.It is not recommended to use carbon fiber within a myo-electric prosthesis.