30 N°: 999341_EN_DVR 2pro/12.07.2017Operation5.2.2 Adjust switch on time and measuring cycleAdjust power‑on time1. Switch on the gauge and press MODE key.5 On the display: Adjust power‑on time.5 Display of the new pre‑set power‑on time, e. g., 5Minutes (= delivery state).2. Press the UP/DOWN key repeatedly or hold it until therequiredpower‑on time is displayed, e. g., 20 Minutes. Power‑on time min. 1 – 600 Minutes; On = permanent ON Changing pointer direction with MODE key= decrease value / = increase value5 Display of the new pre‑set power‑on time.5 This setting switches off the gauge automatically after 20minutes.3. Press key ON/OFF to confirm theadjustment.5 On the display: Pre‑select measuring cycle.
