vacuubrand MD 4C Instructions For Use Manual

Also see for MV 10C VARIO-B: Instructions for use Instructions for use

vacuubrand MD 4C Instructions For Use Manual Manual pdf 37 page image

page 37 of 68Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefullythe validity of this document with respect to his product. manual-no.: 999290 / 12/12/2016Vacuum controller CVC 3000 .......................................................................................................636559without sensor, without wall plug power supplyWall plug power supply CVC 3000 ...............................................................................................612090Supply voltage 100-230 V~ / 50-60 Hz,Including interchangeable plugs: CEE, CH, UK, US, AUSAnalog-I/O-MODULE, IN 4 - 20 mA, OUT 0 - 10 V ......................................................................635425Isolating amplifier, for the connection of the ATEX VARIO pump/s ...............................................635426for electrical isolation of analog signals, with screw connection, input signal: 0 - 10 V,output signal: 4 - 20 mA, supply voltage 24V DCEx-i power/input isolating amplifier, for the connection of an ATEX vacuum sensor .....................635427sends fed or active 0/4-20 mA signals from the Ex area to a load (active or passive)to the safe area, electrical 3-way isolation, SIL 2,wide range power supplyATEX Vacuum gauge head DMP 331i ..........................................................................................635423BDSENSORS, with KF DN 16, measuring range: 1000-1 mbaraccuracy 1 mbar, with ATEX approval: II 1G Ex ia IIC T4 Ga, output signal 4 - 20 mA,for operation with EX i - power / input isolating amplifier 24VATEX Vacuum gauge head Cerabar T PMP131 ...........................................................................635424Endress+Hauser, with KF DN 16, measuring range: 1000-1 mbar, accuracy: 5 mbar,with ATEX approval: II 2G Ex ib IIC T6, output signal 4 - 20 mA,for operation with Ex i - power / input isolating amplifier 24VExtension cable VACUU·BUS, 2 m ...............................................................................................612552VACUU·BUS cable 2 m, with male plug and with litz wires ...........................................................612462Further information concerning accessories on www.vacuubrand.com and on request.PTFE tubing antistatic, KF DN 16/500 mm ...................................................................................686030PTFE tubing antistatic, KF DN 16/1000 mm .................................................................................686031PTFE tubing antistatic, KF DN 25/500 mm ...................................................................................686032PTFE tubing antistatic, KF DN 25/1000 mm .................................................................................686033Centring ring KF DN 20/25C..........................................................................................................635722with FEP coated seal ring (chemically resistant)Accessories