Adaptec GDT6530 manuals
GDT6530
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- fcc compliance statement
- A. INTRODUCTION
- A.1.1 Available RAIDYNE Upgrades
- A.2 Copyrights, Patents
- A.3 Software License Agreement
- A.4 General Information
- A.5 Product Description
- A.5.6 GDT Controller Firmware and PCI-BIOS
- A.5.9 Driver Software
- B. HARDWARE INSTALLATION
- B.4 What you should know about SCSI
- B.4.2 SCSI Termination
- B.4.3 SCSI ID
- B.4.4 SCSI Accessories from ICP-vortex
- B.5 Installing the GDT controller
- B.6 GDT controller Function Check
- B.6.2 Switching On the PCI Computer System
- B.6.3 Trouble Shooting
- B.7 Checking the GDT controller Configuration
- B.7.1 Starting GDTSETUP
- B.7.2 Updating the GDT Controller with new Firmware and BIOS Versions
- B.6.3 Additional Notes
- C. QUICK-SETUP
- C.2 What is the GDT controller Firmware
- C.3.1 The Express Setup Function of GDTSETUP
- C.4 Levels of Hierarchy within the GDT Firmware
- C.5 Using CD-ROMs, DATs, Tapes, etc
- C.6 Example 1 - Installing a single SCSI Hard Disk
- C.7 Example 2 - Installing a Mirroring Array
- C.8 Example 3 - Installing a RAID 5 Disk Array
- C.9 Example 4 - RAID 5 Disk Arrays with a Hot Fix drive
- C.10 Trying to answer the initial questions
- C.10.2 Which level of redundancy is needed
- C.11 Statuses of a RAIDYNE RAID4/5 Disk Array
- C.11.5 Rebuild status
- D. USING MICROSOFT MS-DOS
- D.3 CONFIG.SYS and the Driver GDTX000.EXE
- D.4 Expanded Memory Managers
- D.5 Using Windows 3.x
- D.6 Using a CD-ROM Drive under MS-DOS or Windows 3.x
- D.6.1 Example: Using an ASW ASPI Module for the NEC CD-ROM
- D.6.2 Example: Using corelSCSI for the NEC CD-ROM
- D.8 Notes on ARCsolo from Cheyenne
- D.9 The GDT ASPI Manager GDTASPI.EXE
- D.9.1 Using ASW ASPIDISK.SYS
- D.10 Using Windows 95
- E. USING IBM OS/2 VERSION 2.X AND WARP
- E.4 Using a CD-ROM Drive under OS/2
- E.4.2 Installation with OS2ASPI.DMD
- novell netware
- F. USING NOVELL NETWARE
- F.4 Novell NetWare 4.x
- G. USING SCO UNIX V/386
- G.4 SCO UNIX System V/386 3.2v4.x & 3.2v5.x
- G.4.1 GDT as additional Controller
- G.6 Instructions on mkdev (ADM) for 3.2v5.x (Open Server)
- G.7 Further Information
- H. USING INTERACTIVE UNIX
- H.3 Installation as Boot Controller
- H.5 Further Information
- I. USING UNIXWARE
- I.4 GDT as an additional Controller
- I.6 Further Information
- J. USING MICROSOFT WINDOWS NT
- J.4 The Installation
- J.4.1 The GDT controller is the only Controller in the system
- J.4.3 Using the Hot-Plug Function with RAID Host Drives
- K. THE DIAGNOSIS PROGRAM GDTMON
- K.1 Loading GDTMON
- K.1.1 Loading the GDTMON program under Netware
- K.1.5 Loading gdtmon under SCO UNIX
- K.2.2 Host Drives
- K.2.3 Cache Drives
- K.2.4 Physical Drives
- K.2.5 Cache Statistics
- K.2.6 Sampling Rate
- K.3 The Menu: View/Change Settings
- K.3.1 Notes and Information on the Hot Plug function of GDTMON
- K.3.2 Controller
- K.3.3 GDT Cache
- K.3.4 Physical Drives
- K.3.5 Cache Drives
- K.3.5.1 Set Cache Drive Name
- K.3.5.2 Hot Plug: Replace Mirror Drive
- K.3.5.3 Hot Plug: Add Mirror Drive
- K.3.5.4 Hot Plug: Remove Mirror Drive
- K.3.5.5 Hot Plug: Add Pool Hot Fix Drive
- K.3.5.6 Hot Plug: Remove Pool Hot Fix Drive
- K.3.6 Array Drives
- K.3.6.1 Parity Verify
- K.3.6.2 Parity Recalculate
- K.3.6.3 Hot Plug: Replace Drive
- K.3.6.4 Hot Plug: Add private Hot Fix Drive
- K.3.6.5 Hot Plug: Add Pool Hot Fix Drive
- K.3.6.6 Hot Plug: Remove private Hot Fix Drive
- K.3.6.7 Hot Plug: Remove Pool Hot Fix Drive
- K.3.7 Save Information
- M. GDTSETUP IN DETAIL
- M.1.1 Host Drive types in RAIDYNE
- M.2 SCSI-Devices which can be run with GDTSETUP
- M.3.1 Special Keys in GDTSETUP
- M.4 Select Controller
- M.5 Configure Controller
- M.6 Initializing Disks
- M.7 Setting Up Cache Drives
- M.7.1 Installing a Cache drive of the Type Disk
- M.7.2 Installing a Cache drive of the Types Chain or Stripe (*)
- M.7.3 Installing a Cache drive of the Type Mirror - RAID 1
- M.8 Configuring Host Drives
- M.8.1 Setting Up Array Drives
- M.8.1.1 Enter Array Drive Name
- M.8.1.3 Add Hot-Fix Drive
- M.8.1.4 Replace drive
- M.8.1.5 Parity Verify
- M.8.1.6 Notes on the configuration of RAID 4/5 host drives
- M.8.2 Swap Host Drives
- M.8.3 Partition Host Drive
- M.9 System Overview
- M.9.1 Last Status Messages of the SCSI Devices
- M.10 Leaving GDTSETUP
- N. APPENDIX
manualsdatabase
Your AI-powered manual search engine