Genie GR05-5001 manuals
GR05-5001
Table of contents
- Introduction
- November 2005
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Machine Specifications
- Performance Specifications
- Manifold Component Specifications
- Hydraulic Hose and Fitting Torque Specifications
- Maintenance Inspection Report
- A-1 Perform Pre-operation Inspection
- A-3 Perform 30 Day Service
- B-1 Inspect the Batteries
- B-2 Inspect the Electrical Wiring
- B-3 Inspect the Tires and Wheels (including castle nut torque)
- B-5 Clean and Lubricate the Columns
- B-7 Test the Emergency Stop
- B-8 Test the Key Switch
- B-10 Inspect the Voltage Inverter (if equipped)
- B-11 Test the Drive Brakes
- B-12 Test the Drive Speed - Stowed Position
- B-13 Test the Drive Speed - Raised Position
- B-14 Test the Slow Drive Speed
- B-15 Test the Flashing Beacons
- B-17 Perform Hydraulic Oil Analysis
- B-18 Inspect the Breather Cap
- C-1 Grease the Platform Overload Mechanism (if equipped)
- C-3 Test the Platform Overload System (if equipped)
- D-1 Calibrate the Platform Overload System (if equipped)
- D-2 Inspect the Mast Assembly for Wear
- D-3 Inspect and Lubricate the Lifting Chains
- E-1 Test or Replace the Hydraulic Oil
- Circuit Boards
- Controller Adjustments
- Software Configuration
- Platform
- Mast
- Glide Pads
- Lift Cylinder
- Level Sensor
- Function Pump
- Function Manifold Components
- Valve Adjustments - Function Manifold
- Valve Coils
- Hydraulic Tank
- Yoke and Drive Motor
- Steer Cylinder
- Drive Brake
- Brake Release Hand Pump Components
manualsdatabase
Your AI-powered manual search engine