ADTRAN HDSL4 manuals
HDSL4
Table of contents
- revision history
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Product Description
- Illustrations
- Figure 2. ADTRAN HDSL4 Remote Units for General Distribution
- Compliance
- Installation Guidelines
- H4TU-R Span Power
- Module Installation
- Edge Connector Wiring
- Figure 5. 3192M, 3192, T200 H4TU-C and T200 H4TU-R Edge Connector Wiring
- Total Access 3000 H4TU-C Edge Connector
- Provisioning
- Provisioning Options, Total Access 3000 H4TU-C
- H4TU-R Bantam Jacks
- Loopbacks
- Figure 8. HDSL4 Loopbacks
- H4TU-R Front Panel Pushbuttons
- Table 9. H4TU-R Front Panel LED Indicators
- Control Port Operation
- Menu Structure
- Figure 10. ADTRAN HDSL4 Main Menu
- Accessing the HDSL4 Main Menu (Total Access 3000 H4TU-C)
- Access Module Menus
- HDSL4 Unit Information
- Provisioning Menu
- Provisioning Menu (Total Access 3000 H4TU-C)
- Span Status
- Span Status Screen (Total Access 3000 H4TU-C)
- View Detailed Status
- Table 10. Auto In Service Status Indications
- Loopbacks and Test
- Loopback and Test Commands Menu (Total Access 3000 H4TU-C)
- BERT Test Functions
- Select Data Pattern
- Toggle Test Direction
- Performance History
- Figure 30. Performance Data Definitions, Loop
- Scratch Pad, Circuit ID and Date/Time Screen
- Terminal Modes
- Alarm History
- HDSL4 Facility Alarm History
- HDSL4 Span History
- Event History
- The System PM/Screen Report
- Troubleshooting
- General Information
- Chronic Circuit Guidance
- View Splice Results
- View Histogram Screen
- Flash Upgrade
- Download HTUC via Y-Modem
- Download HTUC via TFTP
- Boot Block Status
- Virtual Terminal Control
- HDSL4 Deployment Guidelines
- Range Limits
- Resistance Values
- Figure 53. Resistance Budget, Span Powering Two Repeaters
- Figure 54. Resistance Budget, Span Powering Two Repeaters (Example)
- Span Powering Three Repeaters
- Maintenance
- H4TU-C Troubleshooting
- Table 17. H4TU-C Product Specifications
- Table 18. H4TU-R Product Specifications
- Loopback Process Description
- Table A-1. HDSL4 Loopback Control Codes
- Table A-2. Loopback Control Codes
- HDSL4 Features
- TScan
- Bad Splice Detection
- Screen Support
- Splice Detection Screens
- View Splice Results Screen
- View Splice Histogram
- Event History Screen
- Using the Bad Splice Detector
- Fault (GFI, Short) Bridging
- Fast Retrain Feature
- Figure C-1. DSX MON, Tx to Customer
- Figure C-2. DSX MON, Rx from Customer
- Figure C-4. MUX MON, Tx to Customer
- Figure C-6. MUX EQ, Tx to Network, Rx from Network
- Warranty
manualsdatabase
Your AI-powered manual search engine