Laars ProtoNode FPC-N34 manuals
ProtoNode FPC-N34
Table of contents
- technical support
- quick start guide
- Table Of Contents
- Table Of Contents
- Introduction
- BACnet/LonWorks Setup for ProtoCessor ProtoNode FPC-N34/FPC-N35
- Instance, and Baud Rate
- LonWorks DIP Switch Settings
- BACnet MS/TP (FPC-N34): Setting the MAC Address for BMS Network
- BACnet MS/TP and BACnet/IP (FPC-N34): Setting the Device Instance
- BACnet MS/TP (FPC-N34): Setting the Serial Baud Rate for BMS Network
- Interfacing ProtoNode to Devices
- Device Connections to ProtoNode
- Sola wiring to the ProtoNode using Display
- Biasing the Modbus RS-485 Device Network
- End of Line Termination Switch for the Modbus RS-485 Device Network
- BACnet MS/TP or Metasys N2 (FPC-N34): Wiring Field Port to BMS Network
- Power-Up ProtoNode
- BACnet/IP and Modbus TCP/IP: Change the Protonode IP Address
- BACnet/IP and Modbus TCP/IP: Setting IP Address for Field Network
- Figure 18: Changing IP Address via FST Web GUI
- BACnet MS/TP and BACnet/IP: Setting Node_Offset to Assign Specific Device Instances
- LonWorks (FPC-N35): Commissioning ProtoNode on a lonworks Network
- Figure 21: Sample of Fserver.XIF File Being Generated
- CAS BACnet Explorer for Validating ProtoNode in the Field
- CAS BACnet Setup
- Appendix A. Troubleshooting
- Appendix A.2. Check Wiring and Settings
- Appendix A.4. BACnet: Setting Network_Number for more than one ProtoNode on Subnet
- Appendix A.5. LED Diagnostics for Modbus RTU Communications Between ProtoNode and Devices
- Appendix B. Additional Features
- Appendix C. Vendor Information - Laars
- Appendix C.1. Sola Modbus RTU Mappings to BACnet MS/TP, BACnet/IP, Metasys N2 and LonWorks
- Appendix D. "A" Bank DIP Switch Settings
- Appendix E. Reference
- Appendix F. Limited 2 Year Warranty
manualsdatabase
Your AI-powered manual search engine