iDirect iNFINITI 7000 manuals
iNFINITI 7000
Table of contents
- Getting Started
- Install iSite Software and Remote Modem Images on your Laptop
- Establish a Console Connection to the Satellite Router
- Telnet to the iDirect Application
- Discovering the Satellite Router's IP Address
- Modifying Your Laptop's IP Address and Subnet Mask
- Download the Application and Images Package to the Satellite Router
- Download the Options File to the Satellite Router
- Set Up your Antenna
- Point the Antenna Using a Voltmeter on the Transmit IFL Cable
- Calculate Polarization, Azimuth, and Elevation
- Perform Pulse Width Modulation (PWM) Antenna Pointing
- Figure 7-1: Comparing Signal Strength
- Figure 7-2: Locking into a Carrier Stream
- Fine-tune the Antenna Pointing and Cross Polarization
- Preparing for the Cross Polarization Test
- Adjusting Azimuth
- After the Cross Polarization Test
- Establish the 1 dB Compression Point
- Record the Geo Location - Mobile Secure Remotes Only
- Bring the Satellite Router into the Network
- Post Acquisition Activities
- Remote Duties
- Adjusting Power Settings and Configuring UCP Parameters
- Set the Initial Tx Power for a Remote
- Set the Clear Sky C/N Parameters for a Mesh Remote
- iDirect Technical Support and Sales Information
- Appendix A Loading Images using the TFTP Server
- Appendix B Pointing the Antenna through the Console Port
- B.3 Starting the Console Pointing
- B.5 Pointing
- Appendix C Disabling the PWM Voltage through iBuilder
- Appendix D Pinout for RJ-45 to DB-9 Adapter
manualsdatabase
Your AI-powered manual search engine