247Security ZEUS User Manual

Contents

247Security ZEUS User Manual Manual pdf 15 page image

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.comZEUS mDVRUSERS MANUAL142.2.3 SENSOR / ALARM CABLEA 15ft sensor / alarm cable is provided to connect the 4 digital inputs, 1 digital output and motionsensor signals to the GP I/O port of the DVR.Wire Color Signal Description PictureBrown Input DI_1 Connects to Digital Input 1 of GPI/O connector (Pin 1)White/Green Input DI_2 Connects to Digital Input 2 of GPI/O connector (Pin 2)Green Input DI_3 Connects to Digital Input 3 of GPI/O connector (Pin 3)White/Orange Input DI_4 Connects to Digital Input 4 of GPI/O connector (Pin 4)Orange MotionSensorConnects to Motion Sensor of GPI/O connector (Pin 5)White/Brown Output DO_3 Connects to Digital Output 3 of GPI/O connector (Pin 6)Blue GND Connects to GND of GP I/Oconnector (Pin 7)White/Blue GND Connects to GND of GP I/Oconnector (Pin 8)2.2.4 CAMERA CABLESTP (shielded twisted pair) cable is the standard and will use 2x3 Molex plugs for connections makingthe installation simple and straight forward. The cable connectors are keyed so they cannot be connectedincorrectly. Connect one end of the cable to one of the available camera inputs on the DVR and the other endinto the camera.Connector Signal Description Picture6-PinMolex Connects to DVR6-PinMolex Connects to camera2.2.5 GPS MODULE & CABLEAn internally mounted GPS module attaches to a 15ft cable to the back of the DVR using a 2x3 Molexcamera cable. This is an RS-232 connection.Connector Signal Description Picture6-PinMolex connector on DVR6-PinMolex Connects to GPS