247Security ZEUS User Manual

Contents

247Security ZEUS User Manual Manual pdf 21 page image

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.comZEUS mDVRUSERS MANUAL204.2 CONNECT CROSS-OVER CABLEDuring installation the DVR can be connected to a laptop allowing the installer to preview the cameras foraiming purposes. Using the grey cross-over cable shipped with the DVR, attach one end to the DVR port labeledLAN and the other end to the LAN port on the laptop. To verify the correct cable is used check the end of thecable for the “XOVER” label. Note: A patch cable (standard network cable) will not work.4.3 SETTING UP YOUR PC4.3.1 USING WINDOWS XP3.1.4.1. Right click on My Network Places3.1.4.2. Go to Properties and left click3.1.4.3. Right click on Local Area Connection3.1.4.4. Go to Properties and left click3.1.4.5. Left click on Internet Protocol (TCP/IP)3.1.4.6. Left click on Properties3.1.4.7. Record ANY numbers on this screen for your record if needed3.1.4.8. Left click on Use the following IP Address button3.1.4.9. In the IP address window type 192.168.1.553.1.4.10. Left click mouse on Subnet mask and you should have 255.255.255.03.1.4.11. There should be no other numbers in the TCP/IP properties3.1.4.12. Left click on OK or Close4.3.2 USING WINDOWS VISTA3.1.4.13. Right click on the Network icon on the desktop3.1.4.14. Go to Properties and left click3.1.4.15. Find Manage network connections under Tasks and left click3.1.4.16. Right click on Local Area Connection3.1.4.17. Go to Properties and left click3.1.4.18. Message appears asking permission to continue, left click to continue3.1.4.19. Left click on Internet Protocol Version 4 (TCP/IPv4)3.1.4.20. Then left click on Properties3.1.4.21. Record ANY numbers on this screen for your records if needed3.1.4.22. Left click on Use the following IP Address button3.1.4.23. In the IP address window type 192.168.1.553.1.4.24. Left click on Subnet mask and you should have 255.255.255.03.1.4.25. There should be no other numbers in the TCP/IP properties3.1.4.26. Left click on OK or CloseNote: If the steps in setting up your PC do not work, contact you IT department concerning your PC, this is a one-timesetup.4.3.3 USING WINDOWS 73.1.4.27. Click on the Start button in the lower left corner3.1.4.28. Select control panel3.1.4.29. Select and open Network and Sharing center3.1.4.30. Select Change adapter settings