247Security ZEUS User Manual

Contents

247Security ZEUS User Manual Manual pdf 27 page image

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.comZEUS mDVRUSERS MANUAL264.8.4 SHUTDOWN DELAY (S)The Shutdown Delay parameter is used to control how long you want to keep the ZEUS recording afterthe ignition key is switched to the OFF position in the vehicle. For instance, once the ignition key is switchedOFF, the system will delay another x seconds (x seconds is the number that you have entered in the box from10 seconds to 14400 seconds (4 hours)) before shutting off ZEUS system’s power completely. This techniqueprevents potential file corruption or system crash the next time it boots up. The default value of 300 seconds ispre-set in the DVR.4.8.5 STANDBY TIME (S)The Standby mode will enable the DVR to enter into a low power consumption state so that after thevehicle’s ignition has been turned off, DVR can still be accessed via the Wi-Fi connection for DVR configuration,live view and play back of video. When DVR enters standby mode, many hardware components are shut downto conserve power, recording of video is disabled and SmartServer upload occurs.4.8.6 MAXIMUM FILE SIZE (MB) & MAXIMUM FILE TIME (S)The menu basically defines how video files are recorded on the removable hard drive(s). There are twomodes that video files can be recorded. (1) Video files can be recorded by file size “Maximum File (MB)” or (2)by file length “Maximum File Time (s)”. In the field “Maximum File Size (MB)”, you can enter values rangingfrom 10 MB to 300 MB. In the field “Maximum File Time (s)”, you can enter values ranging from 60 seconds to7200 seconds (2 hours).There are pros and cons associated to each value you enter into this box. It can either slow down orspeed up specific features of the DVR, for example, searching files in Play Back Mode, uploading video in theSmartServer upload process.It is recommended the “Maximum File (MB)” values be from 100MB to 300MB for optimalperformance. Each individual video file is broken into or stops recording when it has exceeded theseprogrammable values and a new video file is automatically generated to continue the recording process.4.8.7 EVENT MARKER