2gig Technologies Go Control 2GIG-CNTRL2 Operation & User’s Manual

2gig Technologies Go Control 2GIG-CNTRL2 Operation & User’s Manual Manual pdf 11 page image

9Basic OperationControlling ThermostatsTo adjust a thermostat’s settings, use thefollowing steps.✓ NOTE: Several types of Z-Wave compatiblethermostats are available. Each type willdisplay different supported options.Setting the Mode1. Use the ← or → arrows on each side of themode display to choose between OFF, HEAT,COOL, ENERGY SAVE HEAT, or ENERGYSAVE COOL modes.2. The thermostat will immediately switch to themode selected.Setting the Temperature1. Each thermostat mode (except OFF) can be set toa temperature setpoint. Use the ↓ or ↑ arrowsto choose a temperature setpoint for the currentmode displayed.2. The temperature setpoint is immediatelytransmitted to the thermostat.Setting the Fan ModeIf the thermostat supports Z-Wave fan control,the fan mode selector will be displayed.1. Use the ← or → arrows on each side of the fanmode display to choose between MANUAL,AUTO, MANUAL HIGH, MANUAL LOW,AUTO HIGH, or AUTO LOW (NOTE: Onlymodes supported by the thermostat will bedisplayed).2. The thermostat will set the system’s fan to theselected mode. Manual modes are displayed inyellow to indicate that the fan will remain onand will not be automatically controlled by theheating or cooling system.Thermostat Settings ScreenSelecting a ModeUse arrows toselect modeSelecting a SetpointUse arrows toselect setpointSelecting the Fan ModeUse arrows toselect fan mode