Configuring Login Users 123n select — (Default) The user is automatically connected to a hostselected from the Login Hosts Table. The method of choosing the hostis set using the set connection command byrandom or round robin (default) fashion.n Example:set connection host_select randomn specified — The user is connected to the host specified in thelogin_host_ip_address setting.Login Host IP AddressIf login user's host type is specified, you must enter the IP address for thehost to be connected to.Login ServiceSpecifies the default login service. See step 1 for details.TCP PortOptional. If the login host uses a TCP port number other than 23 (thedefault for Telnet), you can set the TCP port number using this command.For ClearTCP connections, make sure that the host's TCP port numbermatches the TCP port number you enter here.Terminal TypeOptional. Set the terminal type for the remote connection. The default isVT100.3 Save your work.save all
