2-12 C HAPTER 2: I NSTALLING THE N ETWORK D RIVER11 Click OK to accept the default settings for theCardBus PC Card or enter new settings if requested byyour MIS department.The Network Settings Window appears.12 Click OK to bring up the TCP/IP configuration window.13 Enter the IP address.14 Click OK.If networking has not been installed, follow the prompts tocomplete networking installation.15 Remove the LAN Installation Disk and click RestartNow to complete installation.The network driver installation is complete. To confirmsuccessful installation use the File Manager to browsethe network.Windows for Workgroups (WFW)Before you begin installing the network driver, obtain theLAN Installation Disk and Windows for Workgroups v3.11installation files (on hard disk, floppy diskettes, or CD-ROM).The LAN Installation Disk contains a subdirectory structureand files that make it an OEM import disk for WFW.Ask your MIS department for the following information:n Which NDIS driver should you install - the NDIS 3 DOSenhanced-mode driver or the NDIS 2.0 16-bit DOSreal-mode driver?n Transport and Network protocol layer used in theMicrosoft Windows Networkn WFW 3.11 workgroup nameIf you installed any other network adapter or networkdriver in the notebook, consult your system administratorfor further instructions.