3Com 3CCFE575BT User Manual

Contents

Windows for Workgroups (WFW) 2-13Installing the DOS Enhanced-Mode Driver for WFWTo install the NDIS 3 DOS enhanced-mode driver for WFW,follow these steps:1 Using the Windows menu, select Network.2 Double-click Network Setup.3 In the Network Setup dialog box, select theNetworks... button.4 Select Install Microsoft Windows Network and thenclick OK.5 Select the Drivers... button.6 In the Network Drivers dialog box, click Add Adapter.A dialog box appears, listing the supported networkadapters on the diskette.7 From the list of network adapters, select Unlisted OrUpdated Network Adapter, and click OK.8 Insert the LAN Installation Disk in floppy drive A,enter a:\, and click OK in the Install Driver dialog box.9 Select 3Com Megahertz 10/100 LAN CardBus PC Cardand click OK in the Unlisted or Updated NetworkAdapter dialog box.a When prompted for ELPC575.DOS, type a:\ndis2b When prompted for ELPC575.386, type: a:\WFW31110 In the Network Drivers dialog box, click Close to acceptthe displayed values.11 In the Network Setup dialog box, click OK.12 If prompted, supply the information you gatheredbefore you began the installation. After you enterthe information, click OK.A message appears, prompting you to restart yournotebook.13 Click Restart.The network driver installation is complete. You havenetwork access when the notebook restarts.To install the NDIS 2 driver, display the WFWNDIS.TXT file inthe Help directory on the LAN Installation Disk.