2-14 C HAPTER 2: I NSTALLING THE N ETWORK D RIVERAutoLink for Windows 3.x, Windows for Workgroups,and DOSThis section describes how to install the network driver for anotebook running Windows 3.x, Windows for Workgroups,and DOS using the 3Com AutoLink™ program. The AutoLinkprogram automatically installs the NetWare ODI clientsoftware (including the driver), and modifies the CONFIG.SYSand AUTOEXEC.BAT files.To use the AutoLink program, the notebook must use theNovell NetWare 3.12, 4.10, or 4.11 network operatingsystem, and be a NetWare DOS ODI client.1 Make sure the CardBus PC Card is installed andconnected to the network, as described in Chapter 1.2 Boot the notebook under DOS.3 Insert the LAN Installation Disk in the floppy drive,and type the following at the DOS prompt:a:\install [Enter]4 Choose Auto Install and Config for NetWare (AutoLink).An OS selection screen appears.5 Select AutoLink for DOS, Windows 3.x, or WFW 3.11.Several messages appear while the AutoLink program isrunning. A final message indicates successful installation.6 When prompted, remove the LAN Installation Diskand reboot the notebook.7 When prompted, type your user name and passwordto complete installation.