5-36CHAPTER 5: COMMAND L INE I NTERFACEExamplelogging clearThis command clears all log messages stored in the access point’s memory.Syntaxlogging clearCommand ModeGlobal ConfigurationExampleshow loggingThis command displays the logging configuration.Syntaxshow loggingCommand ModeExecExampleEnterprise AP(config)#logging facility 19Enterprise AP(config)#Enterprise AP(config)#logging clearEnterprise AP(config)#Enterprise AP#show loggingLogging Information============================================Syslog State : EnabledLogging Console State : EnabledLogging Level : AlertLogging Facility Type : 16Servers1: 192.254.2.19, UDP Port: 514, State: Enabled2: 0.0.0.0, UDP Port: 514, State: Disabled3: 0.0.0.0, UDP Port: 514, State: Disabled4: 0.0.0.0, UDP Port: 514, State: Disabled=============================================Enterprise AP#
