5-57Using the Command Line InterfaceExampleshow snmp targetThis command displays the SNMP v3 notification target settings.Syntaxshow snmp targetCommand ModeExecExampleshow snmp filterThis command displays the SNMP v3 notification filter settings.Syntaxshow snmp filter [filter-id]• filter-id - A user-defined name that identifies an SNMP v3 notificationfilter. (Maximum length: 32 characters)Command ModeExecEnterprise AP#show snmp group-assignmentsGroupName :RWPrivUserName :chrisEnterprise AP#Enterprise AP#Enterprise AP#show snmp targetHost ID : mytrapsUser : chrisIP Address : 192.254.2.33UDP Port : 162=============================Enterprise AP#
