5-65Using the Command Line Interfaceradius-server addressThis command specifies the primary and secondary RADIUS servers.Syntaxradius-server [secondary] address <host_ip_address | host_name>• secondary - Secondary server.• host_ip_address - IP address of server.• host_name - Host name of server. (Range: 1-20 characters)Default SettingNoneCommand ModeGlobal ConfigurationExampleradius-server portThis command sets the RADIUS server network port.Syntaxradius-server [secondary] port <port_number>• secondary - Secondary server.• port_number - RADIUS server UDP port used for authentication messages.(Range: 1024-65535)Default Setting1812Command ModeGlobal Configurationradius-server vlan-format Sets the format for specifying VLAN IDs on theRADIUS serverGC 5-69show radius Shows the current RADIUS settings Exec 5-69Enterprise AP(config)#radius-server address 192.254.2.25Enterprise AP(config)#Command Function Mode Page
