![3Com 4200G 12-Port Configuration Manual Manual pdf 239 page image](https://manuals-archive2.s3.amazonaws.com/2483832/3c3649b668012ac37e1fc9010f2503c5239f.jpg)
2-3large number of users log in but cannot pass authentication, the switch may run out of ACL resources,preventing other users from logging in. A timer called ACL timer is designed to solve this problem.You can control the usage of ACL resources by setting the ACL timer. The ACL timer starts once a usergets online. If the user has not passed authentication when the ACL timer expires, the occupied ACLresources are released for other users to use. When a tremendous of access requests are present, youcan decrease the timeout period of the ACL timer appropriately for higher utilization of ACL resources.Follow these steps to configure the ACL timer:To do... Use the command... RemarksEnter system view system-view —Set the ACL timer dot1x timer acl-timeoutacl-timeout-valueRequiredBy default, the ACL timeoutperiod is 30 minutes.Displaying and Maintaining Quick EAD DeploymentTo do... Use the command... RemarksDisplay configurationinformation about quick EADdeploymentdisplay dot1x [ sessions |statistics ] [ interfaceinterface-list ]Available in any viewQuick EAD Deployment Configuration ExampleNetwork requirementsA user connects to the switch directly. The switch connects to the Web server and the Internet. The userwill be redirected to the Web server to download the authentication client and upgrade software whenaccessing the Internet through IE before passing authentication. After passing authentication, the usercan access the Internet.