1-16To do… Use the command… RemarksDisplay the statistics of IPv6packets and IPv6 ICMP packets display ipv6 statisticsDisplay the statistics of IPv6 TCPpackets display tcp ipv6 statisticsDisplay the IPv6 TCP connectionstatus display tcp ipv6 statusDisplay the statistics of IPv6UDP packets display udp ipv6 statisticsClear IPv6 dynamic domainname cache information reset dns ipv6 dynamic-hostClear IPv6 neighbor information reset ipv6 neighbors [ all | dynamic | interfaceinterface-type interface-number | static ]Clear the statistics of IPv6packets reset ipv6 statisticsClear the statistics of all IPv6TCP packets reset tcp ipv6 statisticsClear the statistics of all IPv6UDP packets reset udp ipv6 statisticsAvailable inuser viewThe display dns domain and display dns server commands are the same as those of IPv4 DNS. Fordetails about the commands, refer to DNS Operation in this manual.IPv6 Configuration ExampleIPv6 Unicast Address ConfigurationNetwork requirementsTwo switches are directly connected through two Ethernet ports. The Ethernet ports belong to VLAN 2.Different types of IPv6 addresses are configured for the interface VLAN-interface 2 on each switch toverify the connectivity between the two switches. The IPv6 prefix in the EUI-64 format is 2001::/64, theglobal unicast address of Switch A is 3001::1/64, and the global unicast address of Switch B is3001::2/64.Network diagramFigure 1-5 Network diagram for IPv6 address configuration
