3Com 6040 Installation Manual

Also see for Router 6040: Supplementary guide Release note Quick reference guide Specifications Datasheet

Contents

3Com 6040 Installation Manual Manual pdf 48 page image

3Com Router 6000 FamilyInstallation ManualChapter 5Maintaining Software3Com Corporation5-10Parameter DescriptionIP address of the server IP address of the server where VRP is retainedIP address of the gateway You must configure it if the server and the router are notlocated on the same segment.Press to save the configuration.4) When Net Port Download Menu appears, select option 2 to download and writethe application image to Flash memory. The system displays:Starting the TFTPdownload............................................................................................................................................................................................TFTP download completed.File length = [07600856]Writing program code to FLASH...Please wait, it may take a long time…………………………………………………..Writing into Flash Successfully!Now, the system returns to Net Port Download Menu.If you select option 3 in the menu to directly download the program to the SDRAM and run itthere, the downloaded application image cannot survive a reboot because the file is not writtento Flash memory.Note:Upon completion of application image upgrade, the router reboots and checks BootROM version for consistency before starting the VRP software. If the version of thecurrent extended Boot ROM image segment is not the same as that of the extendedsegment to be started, the system automatically updates the Boot ROM image, anddisplays “Upgrade Bootrom............! Download completed. Please wait, it needs along time###### Writing into Boot ROM Succeeds.” Then, the system continues itsboot process.5.3 Dealing with a Router Password LossContact our technical staff in the event of Boot ROM password or user password loss. Theycan help you to set a new password.