3Com 6040 Installation Manual

Also see for Router 6040: Supplementary guide Release note Quick reference guide Specifications Datasheet

Contents

3Com 6040 Installation Manual Manual pdf 70 page image

3Com Router 6000 FamilyInstallation ManualChapter 8Installing B68 Cabinets3Com Corporation8-11Caution:After you combine the cabinets, replace the removed covers.8.2.6 Fixing CabinetsI. Installing anchor stripsAs shown in Figure 8-13, install the anchor strips (two for each cabinet).Note:The anchor strip must be installed in the orientation as shown in Figure 8-13.1) Retaining nut of the anchor strip 2) M16 cabinet feet 3) Anchor stripFigure 8-13 Install anchor stripsII. Installing insulating parts and fixing the anchor stripsFollow these steps to install insulating parts and fix an anchor strip:1) Put the insulating washers under the anchor strip and align them vertically withthe anchor strip fixing holes (one anchor strip needs two insulating washers).2) Screw M12×70 bolts into the holes through the anchor strip, and Torque the boltsto 45 Nm. Before that, you must install other accessories such as insulationwashers and big flat washers as shown in area A in Figure 8-14.