Enter or Modify a Static Address in FDB 6-19Enter or Modify aStatic Address inFDBAdd a new static address to the FDB or update an existing one. The staticentry is added to the Forwarding Database or updated with newdestinations if it exists. A new entry is given a permanent status. Otherstatus values may be given using an SNMP manager. For moreinformation about static entries in the Forwarding Database see “StaticAddresses” on page 11-8.ExampleEnter: [3] [3] [4] 0 0180c2000000 1 2In the static Forwarding Database of bridge #0, the MAC address0180c2000000 is allowed for input bridge-port #1 and output bridge port#2.Block a StaticAddressSpecify bridge-ports on which communication is blocked for a staticaddress in the FDB. For more information about static entries in theForwarding Database see “Static Addresses” on page 11-8.The blocked input and output bridge ports are specified by singlehexadecimal numbers as in Table 6-20.Table 6-24 Task ActionsMenuSequence Enter Result[3] bridge[3] fdb[4] allow1 Bridge number {0-3}2 Station address (MAC address)3 Input bridge-port number {0-5,(0 for all ports)}4 Output bridge-port number(s){1-5} andMember ID (for the ATM port)If the station address does notexist in the static address tableof the FDB, it is added to it andreceives the permanent status .If the address already exists, theports are updated if they aredifferent from those specified.abtthgde.book Page 19 Tuesday, June 23, 1998 10:29 AM
