1-18 CHAPTER 1: GETTING STARTEDConnecting to Your 10BaseT LANFigure 1-6 Connecting to the 10BaseT PortYou can use the 10BaseT connection on the AccessBuilder 500 in thefollowing waysn To connect directly to an Ethernet hub port.n To connect to a 10BaseT in-house LAN socket that connects to yourorganization’s network.n To connect to a single workstation using a 10BaseT crossover cable.Connecting to an Ethernet HubTo connect directly to a hub:1 Connect the UTP cable (not supplied) to the 10BaseT port of theAccessBuilder 500.2 Connect the other end to a 10BaseT port on your hub.
