Quick Configuration 1-35Connecting to the Internet or a PPP RouterTo connect to an Internet router or to a router using Point-to-PointProtocol (PPP), enter IN at the command prompt on the QuickConfiguration screen to display the screen illustrated in Figure 1-19.Figure 1-19 Connecting To The Internet Or PPP RouterComplete the fields on this screen as follows:If you are connecting to the Internet, your service provider will be able togive you the correct values for each of these fields.If you are connecting to a remote PPP router, check with the systemadministrator of the remote network for the correct values for these fields.Name of your Internet Provider or remote site Type the name of yourInternet service provider or of the remote unit that connects to the remoteIP network.ISDN Number of the remote unit Type the ISDN number of theremote unit that connects to the remote IP network.Call Type Set the Call Type required for your ISDN line. Toggle this fieldto the Call Type required by your ISDN service provider.
