Quick Configuration 1-33Connecting to an IP Host on a Different IP NetworkTo connect to an IP host on a different network using FastConnect,enter IPR at the command prompt on the Quick Configuration screento display the screen illustrated in Figure 1-18.Figure 1-18 Connecting To An IP Host On A Different NetworkComplete the fields on this screen as follows:Remote ISDN Number Type the ISDN number of the remote unit thatconnects to the remote IP network.Call Type Set the Call Type required for your ISDN line. Toggle this fieldto the Call Type required by your ISDN service provider.IP Address of this unit’s LAN Type the IP address of this unit. This isthe address you entered on the Name screen.IP Mask of this unit’s LAN Type the IP subnet mask you entered forthis unit on the Name screen. See Appendix A for more informationabout subnet masks.IP Address of this end of the ISDN link By default this field is set toUNNUMBERED which allows unnumbered links to be used. This optionis suitable for most network configurations.
