3Com EtherLink 3C590 User Manual
                                                                            | |
Contents
| 
3-8 CHAPTER 3: INSTALLING THE NETWORK DRIVERSMultiple Adapters in a ClientIf you are running NetWare and have installed multipleadapters in a PCI computer, follow these steps:1 With the main menu displayed (Figure 3-2), select NetworkDrivers.2 When the Network Drivers screen appears, select InstallNovell NetWare Drivers.3 When the Novell NetWare Drivers screen appears, selectCopy DOS ODI Client Driver.A message about PCI adapter backward compatibilityappears, followed by instructions to specify a target drive.The default drive is C:\NWCLIENT.If you are using an ODI driver with multiple adapters alreadyinstalled, and you have not updated the NET.CFG file, themessage shown below appears:NetWare DOS ODI client Multiple EtherLink IIIAdapters found.Use NET.CFG to specify I/O Port.Specify which adapter you want the driver to recognize byadding the I/O port address to the NET.CFG file using thePORT=XXXX parameter.One Adapter in a ServerIf you are running NetWare and have installed a singleadapter in a PCI computer that is functioning as a server,follow the instructions in this section.The 3C59X EtherDisk diskette contains a NetWare 4.x serverdriver (3C59X.LAN) and the NetWare Loadable Modules(NLMs) that enable the NetWare 4.x driver to be used withNetWare 3.11 or 3.12 software. These files are found in the\NETWARE subdirectory. |
Related manuals for 3Com EtherLink 3C590
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine