40 C HAPTER 4: I NSTALLING AND C ONFIGURING THE N ETW ARE D RIVERInstallation and Configuration ScenarioThe instructions in this guide follow a simple scenariothat demonstrates the fundamentals of setting up a sampleconfiguration. Setting up your own configuration mayrequire a slightly different sequence of tasks and differentnumbers of NICs. The NetWare scenario described hereillustrates a server on which no other NICs are installedand follows this sequence:1 Install two server NICs.2 Install the driver on both NICs.3 Install Load Balancing/RSL software.4 Make one group of two NICs.5 Add a NIC to the group, making one group ofthree NICs.6 Add a group to the configuration.Installing and Configuring the SoftwareWith NetWare installed and the server up and running,complete the following steps to install and configure thedriver and Load Balancing/RSL software on a NetWare fileserver. In NetWare screens, use the arrow keys to select anitem and then press Enter. The major steps are listed belowand described in detail in the rest of this section.1 Loading the 3Com EtherLink Server CD2 Copying the Driver3 Specifying the Slot Number4 Loading the Driver5 Setting Up Another NIC6 Installing Load Balancing/RSL Software7 Configuring Load Balancing/RSL Groups8 Verifying the Load Balancing/RSL Configuration9 Verifying the Installation and Configuration
