B INSTALLING 3COMSOFTWARE DURINGNETWARE INSTALLATIONFollow these instructions to install 3Com software whileyou are installing the NetWare network operating system.(This procedure is often called “performing a fresh install.”)These instructions apply to NetWare versions 4.11 and 5.0.Software Installation Requirements NIC — At least one 3Com server NIC must be installedin a PCI bus master slot. The following models aresupported: 3C985B-SX. Operating system — Novell NetWare version 4.11or 5.0 and the most recent patches and updates availablefrom Novell technical support (www.novell.com). Netware Packet Receive Buffers — For guidelines,see Software Installation Requirements in Installing andConfiguring the NetWare Driver. Slot numbers for multiple NICs — For guidelines, seeSoftware Installation Requirements in Installing andConfiguring the NetWare Driver.Installation InstructionsThese instructions are for installing from the3Com EtherLink Server NIC CD. If you download3Com software from the web and make installationdiskettes to use for the installation, the steps are slightlydifferent (you do not need to remove and replace theNetWare CD).1 Start the installation and proceed as usual until youreach the Devices Detected screen.2 In the Devices Detected screen:There are no NICs listed in the Network Boards field. Fromthe Options menu, select Modify.
