4-12 CHAPTER 4: CONFIGURATION FOR AN APPLE MACINTOSH COMPUTERn TEI 1: Number from 64 to 126n SPID 2: Init (if required)n TEI 2: Number from 64 to 126 (if required)Before closing the Configuration dialog box, do the following.1 Confirm that the Configuration dialog box parameters arecorrect.2 Click the Update Configuration button if you made anychanges to the 3C882 ISDN modem configuration.3 Click Quit to exit the Configuration dialog box.This completes the 3C882 ISDN modem configuration.Refer to Chapter 5, “Advanced Configuration,” to review thedefault settings and ensure that they reflect your preferences.If you prefer not to change the default settings, then go onto Chapter 7, “Placing and Receiving Calls.”Configuring Internet Access for a MacintoshComputerThere are two Internet Access Configuration scenarioscovered:n Open Transport (1.1 or higher) with OT/PPPn Open Transport (1.1 or higher) with FreePPPSet Up Using OT/PPP and Open TransportThis section describes setting up the 3C882 ISDN modem foruse with Apple’s Open Transport PPP (OT/PPP) in conjunctionwith Apple’s Open Transport networking software (version1.1 or higher). These instructions assume that the pertinentsoftware has already been installed on your system.
