4-14 CHAPTER 4: CONFIGURATION FOR AN APPLE MACINTOSH COMPUTERFigure 4-14 OT/PPP Modem Control Panel4 Choose the port to which your modem is attached fromthe Connect via pop up menu. Then select the appropriatemodem script file from the Modem menu that bestmatches your dial up criteria.For example, if your ISP accepts connections at 64Kbps, andyour computer’s COM port can handle speeds up to 115K,then you would choose the 3ComImpact™ IQ-64k-115Kmodem script.NOTE: Users of Apple’s System 7.6 or later must move the3ComImpact IQ Modem Script files into a separate folder inorder to access them from the OT/PPP Modem control panel.These CCL scripts were placed in your Extensions folder(located in the System folder) during installation of the3ComImpact IQ ISDN modem software. If you are usingSystem 7.6 or later, drag these modem script files from theExtensions folder into the Modem Scripts folder (also locatedin the Extensions folder). Then select the appropriate scriptfrom the Modem menu.5 Close the Modem control panel by choosing File and Close.This returns you to the PPP control panel, as shown in .
