DUA1840-0AAA01Initializing the Switch 1005 3-27n Network loops may occur if you are not careful when configuring yourbackplane connections. See “Advice for Setting Backplane Connections andAvoiding Loops” on page 2-4.n Ports which form part of a VLT will fail and you will not be able to managethe Switch if your management station communicates via the VLT. To avoidthis:a Remove the VLT configuration from both ends of the VLT link before youinitialize the Switch. Note that the port furthest from your managementstation should have its VLT configuration removed first.b Reconfigure the VLT once the initialization is complete.
