110 CHAPTER 7: GETTING MORE FROM Y OUR T ELEPHONE SYSTEMIf the call is not answered within 5 minutes (default) after it is parked, itrings again at the original telephone. Your administrator can modify thelength of this waiting period.To park a call:1 While you are on a call, press Feature + 444. Or press the Access buttonassigned to Call Park.2 Dial a Call Park extension from the list shown in Table 9 or the list ofextensions at your location.If you select a Call Park extension that is already in use, Park Cancelledappears on the display panel on your 3Com Telephone, and the call ringsback to your telephone. Try another Call Park extension.To notify another user about the parked call:■ From 3Com 3101 and 3101SP Basic Telephones, select an Accessbutton that is assigned for placing telephone calls, and dial theuser’s extension, or use the paging feature. See “Paging” next fordetails.■ From a 3Com 2101 Basic Telephone, press and release the hookswitch. When you hear the dial tone, dial the user’s extension, oruse the paging feature. See “Paging” next for details.To retrieve a parked call:1 Pick up the handset of any telephone on the system.2 Dial the Call Park extension that was assigned to the call.Paging Paging is the general term used to describe the act of broadcasting avoice message through audio speakers.You can:■ Page all extensions with speakers on the systemThis method uses default codes in Table 10.■ Page a subset of all extensions on the system, called a zone.This method uses extensions that the administrator configures for thispurpose.
