23RUNNING THE SETUP W IZARDIf the Gateway needs to be configured, for example if it has notyet been used or has been reset, it will run the Setup Wizardautomatically. This detects some of the settings the Gatewayneeds to function and asks that you input the others.Accessing the WizardThe Cable/DSL Secure Gateway Setup Wizard is Web-based,which means that it is accessed through your Web browser(Netscape Navigator or Internet Explorer).To use the Setup Wizard:1 Ensure that you have at least one computer connected to theGateway. See “Installing the Gateway” on page 15.2 Launch your Web browser on the computer. Enter the URL ofyour Gateway in to the location or address box of your browser(Figure 9).The default URL for the gateway is http://192.168.1.1. If youhave changed the IP address of the unit you should substitutethis for the default address within the URL.Figure 9 Web Browser Location Field (Factory Default)The Login screen, as shown in Figure 10, should appear in yourbrowser. If it does not, refer to “Troubleshooting” on page 67.3 To log in, enter the password (the default password is admin) inthe System Password field and click Log in.Figure 10 Login Screen4 If the password is correct, the OfficeConnect Cable/DSL SecureGateway Welcome screen, shown in Figure 11, will appear. Ifyour Gateway has not been configured before, the Wizard,shown in Figure 12, will also launch automatically.dua08 569-5aaa02.bo o k Pag e 23 Thursday , No vem ber 7 , 2002 3:09 PM