4-12 CHAPTER 4: MANAGI NG YOUR HUB USING QUICK CONFIG M ANAGERViewing the HubQuick Config Manager can display a graphicalrepresentation of the hub you are managing, with:n The ports color coded to show their conditionn The Alert LED reflecting its physical stateTo display the hub:n From the View menu, select Zoom In.Quick Config Manager displays a zoom view of thehub, as shown in Figure 4-4. If the zoom view isalready open, it is selected.Figure 4-4 Zoom View Of The HubThe port color coding shows these conditions:n Green — Port enabled and capable of receiving andtransmitting trafficn Red — Port enabled and partitioned, or portenabled but the connection is lostn Blue — Port disabled by managementIn the Community/Polling dialog box, you canspecify whether the zoom view is invoked on startingQuick Config Manager, and how often the zoom viewis polled (updated). If you want to update the zoomview immediately, without waiting for a poll, selectUpdate Zoom from the File menu.Double-clicking on the Zoom ViewYou can configure information for the hub bydouble-clicking on the zoom view:n If you double-click on a port, the Port dialog box isdisplayed. This is used to configure information for aport, see “Configuring a Port” on page 4-25.n If you double-click on anything other than a port, theGeneral Info dialog box is displayed. This is used toconfigure information for the hub, see “DisplayingInformation About the Hub” on page 4-13.16710.bk : MANAGING.FRM Page 12 Tuesday, October 7, 1997 11:38 AM