3Com OfficeConnect User Manual

Also see for OfficeConnect: Datasheet User guide Datasheet Getting started guide User guide

Contents

3Com OfficeConnect User Manual Manual pdf 23 page image

23RUNNING THE SETUP W IZARDIf the Router needs to be configured, for example if it has notyet been used or has been reset, it will run the Setup Wizardautomatically. This detects some of the settings the Router needsto function and asks that you input the others.Accessing the WizardThe Secure Router Setup Wizard is Web-based, which means thatit is accessed through your Web browser (Netscape Navigator orInternet Explorer).To use the Setup Wizard:1 Ensure that you have at least one computer connected to theRouter. See “Installing the Router” on page 15.2 Launch your Web browser on the computer. Enter the URL ofyour Router in to the location or address box of your browser(Figure 10).The default URL for the Router is http://192.168.1.1. If you havechanged the IP address of the unit you should substitute this forthe default address within the URL.Figure 10 Web Browser Location Field (Factory Default)The Login screen, as shown in Figure 11, should appear in yourbrowser. If it does not, refer to “Troubleshooting” on page 75.3 To log in, enter the password (the default password is admin) inthe System Password field and click Log in.Figure 11 Login Screen4 If the password is correct, the OfficeConnect Secure RouterWelcome screen, shown in Figure 12, will appear. If your Routerhas not been configured before, the Wizard, shown in Figure 13,will also launch automatically.dua08609-5aaa01.book Page 23 Thursday, September 11, 2003 12:15 PM