50Figure 46 Custom Setup Screen4 Select either All WAN PCs can access this server, or AuthorizedRemote IP Address(es). If you select Authorized Remote IPAddress(es), you must specify an IP address or a range ofaddresses. For example, 162.223.41.12-162.223.41.15 givesaccess to all IP addresses in this range.5 Click Add to save the settings.PC PrivilegesAccess from the local network to the Internet can be controlledon a PC-by-PC basis. In the default configuration the Router willallow all connected PCs unlimited access to the Internet.PC Privileges allows you to assign different access rights fordifferent computers on your network, restricting this access andcontrolling your users’ access to outside resources.Select PC Privileges to display the PC Privileges setup screen. Thisis shown in Figure 47 below.The Router’s DHCP server has been enhanced to support PCPrivileges. If you want to control access to the Internet on a userby user basis then you should either use the Router’s DHCPserver or static addressing.Figure 47 PC Privileges ScreenTo use access control for all computers:1 Click the Control PC Access to the Internet radio button.2 Click on All PCs to setup the access rights for all computersconnected to the Router.3 Check the box of a service to authorize it. Clear the box to denythe service. See Figure 48.dua08609-5aaa01.book Page 50 Thursday, September 11, 2003 12:15 PM