3Com SuperStack 3 4400 SE 3C17206 Getting Started Manual

Also see for 3C17204: Datasheet Getting started guide Getting started guide Getting started guide Implementation guide

Contents

3Com SuperStack 3 4400 SE 3C17206 Getting Started Manual Manual pdf 53 page image

Setting Up Web Interface Management 53For further information on generating a host key on your switch andtransferring keys to the Switch using TFTP server please refer toChapter 11 of the “SuperStack 3 Switch Implementation Guide”.Setting Up WebInterfaceManagementThis section describes how you can set up web interface managementover the network.Pre-requisites ■ Ensure you have already set up the Switch with IP information asdescribed in “Setting Up Overview” on page 36.■ Ensure that the Switch is connected to the network using a Category5 twisted pair Ethernet cable with RJ-45 connectors.■ A suitable Web browser.Choosing a BrowserTo display the web interface correctly, use one of the following Webbrowser and platform combinations:Table 8 Supported Web Browsers and PlatformsFor the browser to operate the web interface correctly, JavaScript™ andCascading Style Sheets must be enabled on your browser. These featuresare enabled on a browser by default. You will only need to enable them ifyou have changed your browser settings.To enable style sheets in Netscape Navigator 4.76 on Solaris 2.6, openNetscape Navigator and select Edit > Preferences > Fonts. Select the Usedocument-specified fonts, including Dynamic Fonts radio button. Youshould also set the font sizes as follows:Windows 95 Windows 98Windows NT4Windows2000 Windows XPSolaris2.6Netscape 4.76 ✓ ✕ ✕ ✕ ✕ ✓Netscape 6.2 ✕ ✓ ✓ ✓ ✓ ✕Netscape 7.0 ✕ ✓ ✓ ✓ ✓ ✕Internet Explorer 5.5 ✓ ✓ ✓ ✓ ✓ ✕Internet Explorer 6.0 ✕ ✓ ✓ ✓ ✓ ✕DUA1720-3AAA07.book Page 53 Wednesday, March 17, 2004 1:14 PM