3Com TRANSCEND EM/NT 6.3 Installation Manual

Contents

30 C HAPTER 3: P REPARING TO U SE T RANSCEND W ORK G ROUP M ANGER 6.2 FOR W INDOWSLoading 3ComEnterprise MIBsHP OpenView comes with predefined directories, and it places MIBs indifferent directories. Transcend ignores any MIBs that are present in otherdirectories, and installs all the Transcend MIBs into the\common\ov\mibs\ directory. Be certain that you usethe MIBs that are installed by Transcend and not those found in theOpenView default directories.To load individual Transcend MIBs into OpenView:1 From OpenView, select the Control menu.2 Choose SNMP Manager, Manage Database.3 Select the MIBs that you want to load.To load all Transcend MIBs into OpenView, execute the followingcommand:\common\ov\mibs\loadmib.exeInstallation of MIBs can take several hours to complete. You may proceedwith using Transcend while the MIBs are being loaded.Configuring theTFTP/FTP Server3CServer is a TFTP/FTP server that is installed as a part of Transcend. When3CServer starts, it checks to see if there is another TFTP/FTP server runningon your workstation, if there is, 3CServer displays a warning message andthen disables it's TFTP/FTP services.To use 3CServer as the TFTP Server for Upgrade Manager, do thefollowing:1 Permanently disable the other TFTP server running on the system.2 Open 3CServer and select File, and then Toggle Tftp Server.To use another TFTP server with Upgrade Manager, consult that server'suser guide and use the following default settings: Set the TFTP HomeDirectory to \Upgrade. Set the Timeout to 3 Seconds. Set Maximum Retries to 5.