74 CHAPTER 7: S TANDARD FEATURESsends your Caller ID when you make a call. You can choose one of thefollowing settings:■ Select one of the following settings for all your calls:■ Send Caller ID information (Anonymous Now is disabled).■ Block Caller ID information (Anonymous Now is enabled).■ Block Caller ID information for your next call. This setting only applieswhen the setting for all calls is set to Send Caller ID information. Youmust enter the destination number to call.You can control thesesettings by entering the appropriate feature code.Anonymous Now — When enabled, the system blocks your Caller ID toall dialed numbers and Anonymous displays on the destination phone.Anonymous Next — When enabled, the system restricts Called IDinformation from displaying only on the next call that you make. Thissetting only applies when Anonymous Now is disabled, or the setting forall calls is set to Send Caller ID information.If you disable Caller ID, the system sends your Caller ID to all dialednumbers.To toggle the current default setting, press Feature + 889. If Caller ID isenabled, entering this command disables it for all subsequent calls. IfCaller ID is disabled, entering this command enables it for all subsequentcalls.If transmission of Caller ID information is enabled and you want to blockyour Caller ID for the next call only:1 Pick up the handset.2 Press Feature + 890.3 Dial the number. Your ID is not delivered to the caller.Setting up aConference CallThe conference feature enables you to have three people on one call(4-way calling).If your telephone is part of a bridged extension, see Call Transfer, CallConferencing, and Bridged Line Calls for additional information.
