3M Multimedia Projector MP8749 Operator's Manual

Also see for Multimedia Projector MP8749: Quick start guide Information sheet User manual Technical manual Basic technical manual

3M Multimedia Projector MP8749 Operator's Manual Manual pdf 28 page image

wnloaded from Projector.coMULTIFUNCTIONAL SETTINGS (continued)INPUT MenuWith the INPUT menu, the four items shown in the Table below can beperformed. With inputting of RGB IN 1 and RGB IN 2 signals, thehorizontal and vertical frequencies of the signals will be displayed on theinitial screen of the INPUT menu.Perform each operation in accordance with the instructions in the Table.26Item DescriptionAUTOAuto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, HPHASE, and H SIZE. Use this function with the maximum window size.Auto Adjust (for VIDEO/S-VIDEO): Automatically selects the proper VIDEOmode for the current input signal. This function is active only when the AUTOmode is selected for the item VIDEO. Refer to the description for the itemVIDEO below.• This function may not be available with a PAL60 signal and certain othersignals.• The AUTO mode operation requires approximately 10 seconds.• For COMPONENT VIDEO, the signal type is identified automatically even ifthis function is inactive. For a HDTV signal, refer to the item HDTV below.VIDEOSelect Mode of Signal Type (for VIDEO/S-VIDEO):AUTO NTSC PAL SECAMNTSC4.43 M-PAL N-PALSelecting AUTO mode activates and performs the AUTO function for VIDEO/S-VIDEO. It automatically selects the proper mode from among those above.Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g.The image becomes irregular, or lacks color.)• AUTO mode may not function correctly with a PAL60 signal and certain othersignals.• The AUTO mode operation requires approximately 10 seconds.• For COMPONENT VIDEO, the signal type is identified automatically even ifthis function is inactive. For a HDTV signal, refer to the item HDTV below.HDTVSelect HDTV Signal Mode:1080i 1035i• If the selected HDTV mode is incompatible with the input signal, the picturemay be distorted.SYNC ON GOn/Off SYNC ON G Mode:TURN ON TURN OFFSelecting TURN ON turns on the SYNC ON G mode. The SYNC ON G modeallows reception of SYNC on G.• In the SYNC ON G mode, the picture may be distorted with certain inputsignals. In such a case, remove the signal connector so that no signal isreceived and turn SYNC ON G off, and then reconnect the signal.Example : INPUT Menu(AUTO)INPUT MenuMENU: SELECTMAINPICTURE-1PICTURE-2INPUTSCREENOPTIONAUTOVIDEOHDTVSYNC ON GEXECUTE