wnloaded from Projector.co34Fixing the HandleTHE HANDLECaring for the inside of the projector :In order to ensure the safe use of your projector, please have it cleaned and inspected byyour local dealer about once every 2 years. Never try to care for the inside of the unityourself. Doing so is dangerous.Caring for the lens :Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch thelens directly with your hand.Caring for the cabinet and remote control transmitter :Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or aneutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightlywith a soft, dry cloth.ATTENTION • Make sure to turn off the power and unplug the power cord before caring forthe unit. Please carefully read the "Product Safety Guide", in order to care for your projectorcorrectly.• Do not use cleaners or chemicals other than those listed above, including benzeneand paint thinner.• Do not use aerosols or sprays.• Do not polish or wipe with hard objects.CAUTION • Make sure the handle is fixed before carrying the projector with thehandle. If the projector should be dropped from the handle should be off, it couldresult in an injury, and continued use could result in fire or electrical shock. Do notflourish the projector with the handle.OTHER CARE1 Raise up the handle hook, and pass oneend of the handle through the hole ofhandle hook.2 Buckle the end of the handle, as theright drawing.3 Fix the other end of the handle to theother handle hook in the same way.Fix the enclosed handle if you need.